基于響應面法的TA15鈦合金顯微組織預報和優化
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-06-03
對在不同參數下熱變形后水冷的TA15合金進行800 ℃保溫1 h的真空退火熱處理，借助于電子背散射衍射(EBSD)技術，分析熱變形參數對TA15合金退火顯微組織的影響。針對TA15合金熱加工工藝參數與顯微組織特征參數之間高度復雜的非線性關系，提出利用響應面法建立二者之間的量化模型，給出表征工藝參數與顯微組織特征參數之間的響應面函數。
基于響應面法的TA15鈦合金顯微組織預報和優化Prediction and optimization of TA15 titanium alloy microstructure based on response surface methodology對在不同參數下熱變形后水冷的TA15合金進行800 ℃保溫1 h的真空退火熱處理，借助于電子背散射衍射(EBSD)技術，分析熱變形參數對TA15合金退火顯微組織的影響。針對TA15合金熱加工工藝參數與顯微組織特征參數之間高度復雜的非線性關系，提出利用響應面法建立二者之間的量化模型，給出表征工藝參數與顯微組織特征參數之間的響應面函數。同時，對響應面模型進行多目標可視化優化，獲得最優工藝參數范圍:變形溫度為950 ℃，應變速率為0.063~0.1 s-1，變形量為0.4~0.6時可以獲得具有優異綜合力學性能的三態組織;變形溫度為1000 ℃，應變速率為0.1~0.316 s-1，變形量為0.2~0.45時可以獲得具有高損傷容限性的片層組織。
TA15 titanium alloy deformed at different parameters was conducted heat treatment at 800 ℃ and kept for 1 h, and at the same time the electron backscattered diffraction (EBSD) technique was applied to analyze the influence of thermal deformation parameters on the microstructure of annealed TA15 titanium alloy. As the result that the highly complex nonlinear relationship between process parameters and microstructure parameters of TA15 titanium alloy, a quantitative prediction model was built based on the response surface methodology (RSM), the response surface function representation of process parameters and microstructure characteristic parameters were obtained. In addition, the optimal process parameters were obtained by multi-objective visualization optimization. The results show that it can be obtained tri-modal microstructure with excellent mechanical properties at 950 ℃, strain rates of 0.063-0.1 s-1, the amount of deformation of 0.4-0.6. However, it can be obtained lamellar structure with high damage tolerance at 1000 ℃, strain rates of 0.1-0.316 s-1, the amount of deformation of 0.2-0.45.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI
has been a reliable partner and supplier of sophisticated and high-quality
semi-finished products maed of alloys. In dialogue with our customers, we
optimise our products to meet the specific application requirements. AILIAI
develops the best alloy material solutions for current and future
challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For
more information on the alloys and services that we supply,?call
us?at
086-021-67660801 or email us at [email protected]. You can also get in touch
on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.