不同表面改性強化處理對TC4鈦合金表面完整性及疲勞性能的影響
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-06-01
對 TC4 鈦合金進行了噴丸強化、激光沖擊強化和低塑性拋光 3 種表面強化改性處理, 測定了不同表面改性處理下的表面粗糙度、顯微硬度、殘余應力及微觀組織, 研究了不同表面改性處理下的旋轉彎曲疲勞性能, 利用 SEM 觀察分析了疲勞斷口特征, 提出了表面強化改性機理和效果評價方法.
不同表面改性強化處理對TC4鈦合金表面完整性及疲勞性能的影響INFLUENCE OF DIFFERENT SURFACE MODIFICATION?TREATMENTS ON SURFACE INTEGRITY AND FATIGUE?PERFORMANCE OF TC4 TITANIUM ALLOY對 TC4 鈦合金進行了噴丸強化、激光沖擊強化和低塑性拋光 3 種表面強化改性處理, 測定了不同表面改性處理下的表面粗糙度、顯微硬度、殘余應力及微觀組織, 研究了不同表面改性處理下的旋轉彎曲疲勞性能, 利用 SEM 觀察分析了疲勞斷口特征, 提出了表面強化改性機理和效果評價方法. 結果表明, 噴丸強化、激光沖擊強化和低塑性拋光 3 種表面強化改性處理后, TC4 鈦合金的旋轉彎曲疲勞壽命提高, 疲勞強度也大幅度提升, 而且疲勞裂紋位于表面強化層下的次表層; 對于未表面強化改性處理的 TC4 鈦合金,?疲勞裂紋位于表面. 基于位錯理論, 對次表層裂紋萌生抗力和疲勞強度進行了分析并給出了定量分析模型.?
TC4 titanium alloy is usually used to manufacture engine blades, blings or blisks and fatigue is the?main failure of these components due to its high strength, good corrosion resistance and light weight. In?engineering applications, three typical surface modification processes as shot peening (SP), laser shock peening?(LSP) and low plasticity burnishing (LPB) were employed to improve fatigue performance. In this work, SP, LSP?and LSB were taken to enhance surface layer of TC4 titanium alloy. The surface integrity of specimens including?surface roughness, microhardness, residual stresses and microstructure was investigated to obtain the effects of?modification on surface layer by different methods. The rotation bending fatigue performance was tested at room?temperature and fatigue fracture surfaces were analyzed by SEM. Fatigue life was compared at the same stress?760 MPa with the referece machinced specimen. Fatigue strength was determined by stair method for 1×107 cyc.?The results show that both the rotation bending fatigue life and fatigue strength of TC4 titanium alloy are?increased by these surface modification processes. The fatigue life prolonging factor (FLPF) for SPed specimens?is 20.4, and FLPF for LSPed specimens and LPBed specimens is 89.6 and 99, respectively. Meanwhile, fatigue?strength improvement percentage (FSIP) for SPed, LSPed and LPBed specimens is 36.3%, 37.8% and 38.8%,?respectively. Moreover, the fatigue cracks initiate beneath surface enhanced layer for surface-modified specimens,?while they are located at surfaces for un-surface-enhanced ones. Based on dislocation theory, the subsurface?cracks initiation resistance and fatigue strength for surface-enhanced specimens were analysied. Finally, surface?modification mechanism was discussedand some quantitative analysis method on surface modification effects was?proposed. For surface-enhanced smooth specimens, the FSIP limit is 40% based on proposed analysis model and?it is verified in this work by different surface layer enhancement processes (36.3% for SPed specimens, 37.8% for?LSPed and 38.8% for LPBed specimens are near to 40%). Fatigue total life including initiation and propagation is?a complex problem, and therefore it is difficult to give accurate life prediction and analysis, especially for small?crack growth, although some invesitigations on total fatigue life can be roughly estimated based on Basquin?relation for stress fatigue life or Coffin and Marson equtionfor strain fatigue life which have not any physical?meaning or any mechanism.?
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI
has been a reliable partner and supplier of sophisticated and high-quality
semi-finished products maed of alloys. In dialogue with our customers, we
optimise our products to meet the specific application requirements. AILIAI
develops the best alloy material solutions for current and future
challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For
more information on the alloys and services that we supply,?call
us?at
086-021-67660801 or email us at [email protected]. You can also get in touch
on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.