300 ℃氮?dú)庵薪蛔冚d荷條件下Inconel 690合金的微動磨損特性
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-04-01
采用改進后的PLINT高溫可控氣氛的微動磨損試驗機，研究Inconel 690合金在300 ℃氮?dú)饧胺ㄏ蚪蛔冚d荷條件下的微動磨損機制和動力學特性。
300 ℃氮?dú)庵薪蛔冚d荷條件下Inconel 690合金的微動磨損特性Fretting wear behavior of Inconel 690 alloyunderalternating load conditions at 300 ℃ in nitrogen environment采用改進后的PLINT高溫可控氣氛的微動磨損試驗機，研究Inconel 690合金在300 ℃氮?dú)饧胺ㄏ蚪蛔冚d荷條件下的微動磨損機制和動力學特性。結果表明: 微動運行行為與激振頻率密切相關，微動的Ft-D曲線呈現摩擦力周期波動的平行四邊形型特征，微動運行于滑移區。在300 ℃氮?dú)猸h(huán)境中，摩擦力的動態變化可以分為5個階段，即跑合階段、上升階段、峰值階段、下降階段和穩定階段。Inconel 690合金的微動損傷行為強烈地依賴于載荷、位移幅值、環境溫度、氣氛及激振頻率等試驗條件。從表面損傷形貌看，損傷微結構與試驗參數密切相關；由于交變法向力和切向力共同作用，微動產生疊加效應，使剝層現象更加突出。在300 ℃氮?dú)猸h(huán)境下，Inconel 690合金的損傷機理主要表現為磨粒磨損和剝層。
The frettingwear mechanisms and kinetic behaviours of Inconel690 alloy were investigated on the improved PLINT fretting rig under alternating loads conditions in high-temperature controlled-atmosphere environments. The results show that the fretting running behaviors are closely related to the normal excitation frequency. In parallelogram shaped Ft-D curves, the friction fluctuates periodically, and accordingly the fretting runs in the slip regime (SR). Five stages of friction force curves can be observedat 300 ℃in nitrogen environment, including initial stage, ascending stage, peak value stage descending stage and steady stage. The fretting wear behaviors for Inconel 690 alloy strongly depend on the normal load, displacement amplitude, temperature, atmosphere, excitation frequency and other test conditions. The super position effect of fretting wear behavior due to the combined effect of alternating normal force and tangential force is produced, so that delamination phenomenon becomes much more prominent. The abrasive wear and delamination are the major mechanisms of Inconel 690 at 300 ℃ in nitrogen environment.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.