Ti-1023合金鑄錠的鐵偏析
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-24
分析了Ti-1023鈦錠中鐵元素偏析的原因以及改善措施，通過合理控制原材料規格、混料方式、熔煉次數及熔煉參數，采用真空自耗電弧爐熔煉出直徑為400 mm的Ti-1023鑄錠。
Ti-1023合金鑄錠的鐵偏析Iron segregation of Ti-1023 titanium ingots分析了Ti-1023鈦錠中鐵元素偏析的原因以及改善措施，通過合理控制原材料規格、混料方式、熔煉次數及熔煉參數，采用真空自耗電弧爐熔煉出直徑為400 mm的Ti-1023鑄錠。成分分析顯示，鈦錠上端面Fe元素含量為1.67%~1.76%，最大偏差不超過0.1%；鈦錠底面Fe元素含量為1.70%~1.81%，最大偏差為0.11%；鈦錠側表面上、中、下位置Fe元素含量為1.61%~1.80%；整根鈦錠Fe元素含量偏差范圍在0.2%以內，鑄錠成分均勻性良好。
The reasons and improvements of Fe segregation in Ti-1023 titanium ingots were analyzed and summarized, then a d 400 mm Ti-1023 ingot was manufactured with VAR through controlling the specification of raw material, mixing way, melting time and melting parameter. Component analysis shows that, the content of element Fe in the upper end is 1.67%?1.76%, the deviation does not exceed 0.1%; that in the lower end is 1.70%?1.81%, the maximum deviation is 0.11%; that on the lateral surface is 1.61%?1.80%; the content deviation of the element Fe of the whole ingot is less than 0.2%, so the component homogenization is fine.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.