DP工藝Inconel 718合金高溫流變曲線修正及應變本構模型
發布人：上海艾荔艾金屬材料有限公司bt990.com.cn
更新時間：2015-12-31
采用等溫?zé)釅嚎s實驗研究DP工藝Inconel 718合金在變形溫度為900~1060 ℃，應變速率為0.001~0.5 s-1條件下的高溫流變行為，分析摩擦因數和絕熱溫升對真應力-真應變曲線的影響，并對摩擦引起的流變應力誤差進行了修正，建立了基于應變量的應變本構模型。
DP工藝Inconel 718合金高溫流變曲線修正及應變本構模型Revised hot deformation behavior and strain constitutivemodeling of delta-processed Inconel 718 alloy采用等溫?zé)釅嚎s實驗研究DP工藝Inconel 718合金在變形溫度為900~1060 ℃，應變速率為0.001~0.5 s-1條件下的高溫流變行為，分析摩擦因數和絕熱溫升對真應力-真應變曲線的影響，并對摩擦引起的流變應力誤差進行了修正，建立了基于應變量的應變本構模型。結果表明：隨著應變速率的增大和變形溫度的降低，摩擦因數的影響趨于明顯，變形激活能和材料常數是應變量的函數。對引入應變量參數建立的用于預測工藝處理的Inconel 718合金不同變形量時的流變應力本構模型進行誤差分析，其實驗值與預測值的相關性系數為0.998，平均相對誤差絕對值為3.87%，能夠用于準確預測不同變形量時合金的流變應力值。
The flow behavior of delta-processed (DP) Inconel 718 was studied by revised hot deformation at temperature range of 900-1060 ℃ and strain rate range of 0.001-0.5 s-1. The effects of friction coefficient and temperature on the compressive deformation behavior, such as true stress-strain curves, were investigated, and the flow stress error caused by friction was revised. Then, the constitutive equation considering the compensation of strain was established. The results show that the effect of the friction is obvious with the increasing strain rate and the decreasing deformation temperature. The influence of strain was also incorporated by considering the variation of material constants as a function of strain. The prediction accuracy of developed constitutive modeling was assessed using standard statistical formulae. The correlation coefficient is 0.998 and the average absolute relative error is 3.87%. It is revealed that the proposed deformation constitutive equation gives an accurate estimate for the flow stress of delta-processed Inconel 718 alloy.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博，微信和領英與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin?and?LinkedIn.