2124鋁合金的均勻化熱處理
發布人：上海艾荔艾金屬材料有限公司bt990.com.cn
更新時間：2015-12-19
采用光學顯微鏡、差熱分析、掃描電鏡、能譜分析、透射電鏡和X射線衍射研究2124鋁合金鑄態與均勻化態的顯微組織演化和成分分布。
2124鋁合金的均勻化熱處理Homogenizing heat treatment of 2124 aluminum alloy采用光學顯微鏡、差熱分析、掃描電鏡、能譜分析、透射電鏡和X射線衍射研究2124鋁合金鑄態與均勻化態的顯微組織演化和成分分布。結果表明：2124鋁合金的鑄態組織枝晶偏析嚴重，在晶界存在很多低熔點共晶相，合金中元素Cu，Mg和Mn在晶內及晶界分布不均勻；經過均勻化處理后，2124鋁合金組織中的非平衡相逐漸溶解，各組元分布趨于均勻；該合金的過燒溫度為504 ℃，最佳均勻化制度為(490 ℃，24 h)，該制度與均勻化動力學方程得到的結論基本一致。
The evolution of the microstructure and the composition distribution of as-cast and homogenized 2124 aluminum alloy were studied by optical microscopy (OM), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), energy dispersive X-ray diffractometry (EDX), transmission electron microscopy (TEM) and X-ray diffractometry (XRD). The results show that serious dendrite segregation exists in the 2124 alloy ingot, and many eutectic phases with low melting-point exist in the grain boundary. Cu, Mg and Mn elements distribute unevenly from the grain boundary to inside of the alloy. The non-equilibrium eutectic phases dissolve after homogenization, and the grain boundary becomes sparse and all elements become more homogenized. The over-burnt temperature is 504 ℃. And the proper homogenizing process of the 2124 alloy is (490 ℃, 24 h), which is corresponding with the results of homogenizing kinetic equation.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件[email protected]聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at [email protected]. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.